pd01s/d series 1w dc/dc converter, sip-package, high isolation ds_pd01s/d_03152012 e-mail: dcdc@delta.com.tw http://www.delta.com.tw/dcdc p1 features ? efficiency up to 81% ? sip package with industry standard pinout ? package dimension: 5v&12v models: 19.5 x 10.2 x 6.1 mm (0.77?x 0.4?x 0.24?) 15v&24v models: 19.5 x 10.2 x 7.1 mm (0.77?x 0.4?x 0.28?) ? high isolation voltage 3000 vdc ? operating temperature range -40c to +85c ? single and dual outputs ? >2 mhours mtbf ? 3 years product warranty the pd01s/d series are miniature, sip package, isolated 1w dc/dc converters with 3,000vdc isolation. it offers short circuit pr otection and allows a wide operating temperature range of ?40c to +85c. these isolated dc/dc converters are the latest offering from a wor ld leader in power systems technology and manufacturing D delta electronics, inc model list output current input current efficiency (typ.) input voltage (range) output voltage max. min. @max. load @no load load regulation max. capacitive load @max. load model number vdc vdc ma ma ma(typ.) ma(typ.) % (max.) vdc pd01s0503a 3.3 260 5 235 10 73 pd01s0505a 5 200 4 281 10 71 pd01s0509a 9 110 2 260 8 76 pd01s0512a 12 84 1.5 258 7 78 pd01s0515a 15 67 1 258 7 220 78 pd01d0505a 5 100 2 278 10 72 pd01d0509a 9 56 1 262 8 77 pd01d0512a 12 42 0.8 258 7 78 pd01d0515a 5 (4.5 ~ 5.5) 15 34 0.7 258 30 7 100* 79 pd01s1203a 3.3 260 5 96 8 74 pd01s1205a 5 200 4 114 8 73 pd01s1209a 9 110 2 106 5 78 pd01s1212a 12 84 1.5 105 5 80 pd01s1215a 15 67 1 104 5 220 80 pd01d1205a 5 100 2 113 8 74 pd01d1209a 9 56 1 106 5 79 pd01d1212a 12 42 0.8 104 5 81 pd01d1215a 12 (10.8 ~ 13.2) 15 34 0.7 105 12 5 100* 81 pd01s2403a 3.3 260 5 49 8 73 pd01s2405a 5 200 4 59 8 71 pd01s2409a 9 110 2 54 5 76 pd01s2412a 12 84 1.5 54 5 78 pd01s2415a 15 67 1 53 5 220 79 pd01d2405a 5 100 2 58 8 72 pd01d2409a 9 56 1 55 5 76 pd01d2412a 12 42 0.8 53 5 79 pd01d2415a 24 (21.6 ~ 26.4) 15 34 0.7 53 7 5 100* 80 * for each output
ds_pd01s/d_03152012 e-mail: dcdc@delta.com.tw http://www.delta.com.tw/dcdc input characteristics parameter model min. typ. max. unit 5v input models 4.5 5 5.5 12v input models 10.8 12 13.2 input voltage range 24v input models 21.6 24 26.4 5v input models -0.7 --- 9 12v input models -0.7 --- 18 input surge voltage (1 sec. max.) 24v input models -0.7 --- 30 vdc reverse polarity input current --- --- 0.3 a input filter internal capacitor internal power dissipation all models --- --- 450 mw output characteristics parameter conditions min. typ. max. unit output voltage accuracy --- 1.0 3.0 % output voltage balance dual output, balanced loads --- 0.1 1.0 % line regulation for vin change of 1% --- 1.2 1.5 % load regulation io=20% to 100% see model selection guide ripple & noise (20mhz) --- 65 100 mv p-p ripple & noise (20mhz) over line, load & temp. --- --- 150 mv p-p ripple & noise (20mhz) --- --- 15 mv rms temperature coefficient --- 0.01 0.02 %/ short circuit protection 0.5 second max. general characteristics parameter conditions min. typ. max. unit i/o isolation voltage (rated) 60 seconds 3000 --- --- vdc i/o isolation resistance 500 vdc 10 --- --- g ? i/o isolation capacitance 100khz, 1v --- 60 100 pf switching frequency 70 100 120 khz mtbf (calculated) mil-hdbk-217f@25 , ground benign 2,000,000 ----- ----- hours recommended outside input fuse 5v input models 12v input models 24v input models 500ma slow-blow type 200ma slow-blow type 100ma slow-blow type environmental specifications parameter conditions min. max. unit operating temperature range (with derating) ambient -40 +85 case temperature --- +90 storage temperature range -50 +125 humidity (non condensing) --- 95 % rel. h cooling free-air convection lead temperature (1.5mm from case for 10sec.) --- 260 p2
ds_pd01s/d_03152012 e-mail: dcdc@delta.com.tw http://www.delta.com.tw/dcdc power derating curve (3.3v, 5v & 5v} (all other output) notes 1 specifications typical at ta=+25 , resistive load, nominal input voltage and rated output current unless otherwise noted. 2 ripple & noise measurement bandwidth is 0-20mhz. 3 these power converters require a minimum output loading to maintain specified regulation, operation under no-load conditions wi ll not damage these modules; however they may not meet all specifications listed. 4 all dc/dc converters should be externally fused at the front end for protection. 5 specifications subject to change without notice. mechancial drawing mechanical dimensions pin connections pin single output dual output 1 +vin +vin 2 -vin -vin 5 -vout -vout 6 no pin common 7 +vout +vout 5v&12v input : t: 6.1mm(0.24 inch) 15v&24v input: t: 7.1mm(0.28 inch) ? all dimensions in mm (inches) ? tolerance: x.x0.25 (x.xx0.01) x.xx0.13 ( x.xxx0.005) ? pins 0.05(0.002) physical outline case size (5v&12v input) : 19.5x6.1x10.2mm (0.77x0.24x0.40 inches) case size(15v&24v input) : 19.5x7.1x10.2mm (0.77x0.28x0.40 inches) case material non-conductive black plastic (flammability to ul 94v-0 rated) : weight (5v&12v input) : 2.2g weight (15v&24v input) : 2.6g p3 3.2 [0.13] 10.2 [0.40] 19.5 [0.77] t 0.50 [0.02] bottom view 18.5 [0.73] 0.25 [0.01] 1.3 [0.05] 2.54 [0.10] 7.62 [0.30] 2x2.54 [2x0.10] 0.5 [0.02] 2.35 [0.09] 0.5 [0.02] 12 7 56
ds_pd01s/d_03152012 e-mail: dcdc@delta.com.tw http://www.delta.com.tw/dcdc part numbering system p d 01 s 05 05 a form factor family series watt number of outputs input voltage output voltage option code d-dip a~z 01:1w s - single 03:3.3v 03:3.3v a - std. functions p-sip 02:2w d- dual 05: 5v 05: 5v s-smd 03:3w 12:12v 12:12v 04:4w 24: 24v 15: 15v 06:6w 48:48v 24: 24v warranty delta offers a three(3) years limited warranty. complete warranty information is listed on our web site or is available upon re quest from delta. information furnished by delta is believed to be accurate and reliable. however, no responsibility is assumed by delta for its use, nor for any infringements of patents or other rights of third parties, which may result from its use. no license is granted by implication or otherwise under any patent or patent rights of delta. delta reserves the right to revise these specifications at any time, without notice. p4
|
